dmesg - 2 x Intel I210 - 2 x Intel Xeon E5-2620 v3

Return To 2 x Intel I210 - 2 x Intel Xeon E5-2620 v3 System Information

microcode: microcode updated early to revision 0x49, date = 2021-08-11
Linux version 5.15.0-46-generic (buildd@lcy02-amd64-115) (gcc (Ubuntu 11.2.0-19ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #49-Ubuntu SMP Thu Aug 4 18:03:25 UTC 2022 (Ubuntu 5.15.0-46.49-generic 5.15.39)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078f24fff] usable
BIOS-e820: [mem 0x0000000078f25000-0x0000000079862fff] reserved
BIOS-e820: [mem 0x0000000079863000-0x0000000079d41fff] ACPI NVS
BIOS-e820: [mem 0x0000000079d42000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000407fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro Super Server/X10DRL-i, BIOS 3.4 05/21/2021
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.690 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x4080000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x78f25 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce60-0x000fce6f]
Using GB pages for direct mapping
RAMDISK: [mem 0x30739000-0x34393fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000798630B0 0000DC (v01                 01072009 AMI  00010013)
ACPI: FACP 0x0000000079895050 00010C (v05 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: DSDT 0x0000000079863220 031E2E (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079D40F80 000040
ACPI: APIC 0x0000000079895160 0001B4 (v03 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: FPDT 0x0000000079895318 000044 (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: FIDT 0x0000000079895360 00009C (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: SPMI 0x0000000079895400 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079895448 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079895488 000042 (v01 SUPERM SMCI--MB 01072009      00000000)
ACPI: HPET 0x00000000798954D0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: MSCT 0x0000000079895508 000090 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: NFIT 0x0000000079895598 018028 (v01                 00000000      00000000)
ACPI: SLIT 0x00000000798AD5C0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SRAT 0x00000000798AD5F0 001158 (v03 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x00000000798AE748 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x00000000798AE788 017141 (v02 SUPERM PmMgt    00000001 INTL 20120913)
ACPI: NITR 0x00000000798C58D0 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SSDT 0x00000000798C5948 00264C (v02 SUPERM SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x00000000798C7F98 000064 (v02 SUPERM SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x00000000798C8000 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x00000000798C8108 000128 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x00000000798C8230 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x00000000798C84B0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x00000000798C84E0 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x00000000798C8710 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0x79895050-0x7989515b]
ACPI: Reserving DSDT table memory at [mem 0x79863220-0x7989504d]
ACPI: Reserving FACS table memory at [mem 0x79d40f80-0x79d40fbf]
ACPI: Reserving APIC table memory at [mem 0x79895160-0x79895313]
ACPI: Reserving FPDT table memory at [mem 0x79895318-0x7989535b]
ACPI: Reserving FIDT table memory at [mem 0x79895360-0x798953fb]
ACPI: Reserving SPMI table memory at [mem 0x79895400-0x79895440]
ACPI: Reserving MCFG table memory at [mem 0x79895448-0x79895483]
ACPI: Reserving UEFI table memory at [mem 0x79895488-0x798954c9]
ACPI: Reserving HPET table memory at [mem 0x798954d0-0x79895507]
ACPI: Reserving MSCT table memory at [mem 0x79895508-0x79895597]
ACPI: Reserving NFIT table memory at [mem 0x79895598-0x798ad5bf]
ACPI: Reserving SLIT table memory at [mem 0x798ad5c0-0x798ad5ef]
ACPI: Reserving SRAT table memory at [mem 0x798ad5f0-0x798ae747]
ACPI: Reserving WDDT table memory at [mem 0x798ae748-0x798ae787]
ACPI: Reserving SSDT table memory at [mem 0x798ae788-0x798c58c8]
ACPI: Reserving NITR table memory at [mem 0x798c58d0-0x798c5940]
ACPI: Reserving SSDT table memory at [mem 0x798c5948-0x798c7f93]
ACPI: Reserving SSDT table memory at [mem 0x798c7f98-0x798c7ffb]
ACPI: Reserving PRAD table memory at [mem 0x798c8000-0x798c8101]
ACPI: Reserving DMAR table memory at [mem 0x798c8108-0x798c822f]
ACPI: Reserving HEST table memory at [mem 0x798c8230-0x798c84ab]
ACPI: Reserving BERT table memory at [mem 0x798c84b0-0x798c84df]
ACPI: Reserving ERST table memory at [mem 0x798c84e0-0x798c870f]
ACPI: Reserving EINJ table memory at [mem 0x798c8710-0x798c883f]
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 1 -> APIC 0x10 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 1
SRAT: PXM 1 -> APIC 0x18 -> Node 1
SRAT: PXM 1 -> APIC 0x1a -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 1 -> APIC 0x11 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 1
SRAT: PXM 1 -> APIC 0x19 -> Node 1
SRAT: PXM 1 -> APIC 0x1b -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x407fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff]
NODE_DATA(0) allocated [mem 0x207ffd6000-0x207fffffff]
NODE_DATA(1) allocated [mem 0x407ffd5000-0x407fffefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000407fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000097fff]
  node   0: [mem 0x0000000000100000-0x0000000078f24fff]
  node   0: [mem 0x0000000100000000-0x000000207fffffff]
  node   1: [mem 0x0000002080000000-0x000000407fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff]
Initmem setup node 1 [mem 0x0000002080000000-0x000000407fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 104 pages in unavailable ranges
On node 0, zone Normal: 28891 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 24 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: hibernation: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x78f25000-0x79862fff]
PM: hibernation: Registered nosave memory: [mem 0x79863000-0x79d41fff]
PM: hibernation: Registered nosave memory: [mem 0x79d42000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 [0] 14 15 16 17 -- -- -- -- 
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 [1] 20 21 22 23 -- -- -- -- 
Built 2 zonelists, mobility grouping on.  Total pages: 66031592
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-46-generic", will be passed to user space.
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 263944788K/268319472K available (16393K kernel code, 4382K rwdata, 10800K rodata, 3224K init, 6572K bss, 4374424K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2b/0x330 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 50468 entries in 198 pages
ftrace: allocated 198 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
NR_IRQS: 524544, nr_irqs: 1432, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007ba59000 end: 0x0000007ba68fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000c7ffc000 proximity domain: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1
DMAR-IR: IOAPIC id 3 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 1 under DRHD base  0xc7ffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base  0xc7ffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22849f8ffa3, max_idle_ns: 440795300204 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.38 BogoMIPS (lpj=9578760)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes, vmalloc)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5
.... node  #1, CPUs:    #6
smpboot: CPU 6 Converting physical 0 to logical die 1
  #7  #8  #9 #10 #11
.... node  #0, CPUs:   #12
MDS CPU bug present and SMT on, data leak possible. See  for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See  for more details.
 #13 #14 #15 #16 #17
.... node  #1, CPUs:   #18 #19 #20 #21 #22 #23
smp: Brought up 2 nodes, 24 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 24 processors activated (114965.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x79863000-0x79d41fff] (5107712 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 07:43:11, date: 2022-08-21
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1661067791.244:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:02: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:02: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:2f80] type 00 class 0x088000
pci 0000:ff:08.2: [8086:2f32] type 00 class 0x110100
pci 0000:ff:08.3: [8086:2f83] type 00 class 0x088000
pci 0000:ff:09.0: [8086:2f90] type 00 class 0x088000
pci 0000:ff:09.2: [8086:2f33] type 00 class 0x110100
pci 0000:ff:09.3: [8086:2f93] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:2f80] type 00 class 0x088000
pci 0000:7f:08.2: [8086:2f32] type 00 class 0x110100
pci 0000:7f:08.3: [8086:2f83] type 00 class 0x088000
pci 0000:7f:09.0: [8086:2f90] type 00 class 0x088000
pci 0000:7f:09.2: [8086:2f33] type 00 class 0x110100
pci 0000:7f:09.3: [8086:2f93] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:7f:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:7f:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:7f:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:7f:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:7f:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:7f:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:7f:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:7f:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:7f:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:7f:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:7f:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:7f:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:7f:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:7f:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:7f:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:7f:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:7f:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:7f:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:7f:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:7f:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:7f:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:7f:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:7f:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:7f:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:7f:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:7f:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:7f:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:7f:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:7f:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:7f:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:7f:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:7f:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:7f:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:7f:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:7f:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:7f:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:7f:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:7f:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:7f:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:7f:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:7f:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:7f:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:7f:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:7f:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:7f:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:7f:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:7f:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xc762c000-0xc762ffff 64bit]
pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xc7628000-0xc762bfff 64bit]
pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xc7624000-0xc7627fff 64bit]
pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xc7620000-0xc7623fff 64bit]
pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xc761c000-0xc761ffff 64bit]
pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xc7618000-0xc761bfff 64bit]
pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xc7614000-0xc7617fff 64bit]
pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xc7610000-0xc7613fff 64bit]
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xc7639000-0xc7639fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io  0x7110-0x7117]
pci 0000:00:11.4: reg 0x14: [io  0x7100-0x7103]
pci 0000:00:11.4: reg 0x18: [io  0x70f0-0x70f7]
pci 0000:00:11.4: reg 0x1c: [io  0x70e0-0x70e3]
pci 0000:00:11.4: reg 0x20: [io  0x7020-0x703f]
pci 0000:00:11.4: reg 0x24: [mem 0xc7638000-0xc76387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc7600000-0xc760ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc7637000-0xc763700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xc7636000-0xc763600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc7634000-0xc76343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc7633000-0xc76333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x7070-0x7077]
pci 0000:00:1f.2: reg 0x14: [io  0x7060-0x7063]
pci 0000:00:1f.2: reg 0x18: [io  0x7050-0x7057]
pci 0000:00:1f.2: reg 0x1c: [io  0x7040-0x7043]
pci 0000:00:1f.2: reg 0x20: [io  0x7000-0x701f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc7632000-0xc76327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc7631000-0xc76310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1000:005d] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [io  0x6000-0x60ff]
pci 0000:02:00.0: reg 0x14: [mem 0xc7300000-0xc730ffff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xc7200000-0xc72fffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xc7100000-0xc71fffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.0:   bridge window [mem 0xc7100000-0xc73fffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci_bus 0000:05: extended config space not accessible
pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xc6000000-0xc6ffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xc7000000-0xc701ffff]
pci 0000:05:00.0: reg 0x18: [io  0x5000-0x507f]
pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:04:00.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xc7500000-0xc757ffff]
pci 0000:06:00.0: reg 0x18: [io  0x4000-0x401f]
pci 0000:06:00.0: reg 0x1c: [mem 0xc7580000-0xc7583fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xc7500000-0xc75fffff]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xc7400000-0xc747ffff]
pci 0000:07:00.0: reg 0x18: [io  0x3000-0x301f]
pci 0000:07:00.0: reg 0x1c: [mem 0xc7480000-0xc7483fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xc7400000-0xc74fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io  0x8000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
pci 0000:80:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:80:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:80:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
iommu: Default domain type: Translated 
iommu: DMA domain TLB invalidation policy: lazy mode 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:05:00.0: vgaarb: setting as boot VGA device
pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:05:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x78f25000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
pnp 00:03: [dma 0 disabled]
pnp 00:04: [dma 0 disabled]
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:02.0:   bridge window [mem 0xc7100000-0xc73fffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:04:00.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xc7500000-0xc75fffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xc7400000-0xc74fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
pci_bus 0000:00: resource 8 [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: resource 9 [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xc7100000-0xc73fffff]
pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xc7500000-0xc75fffff]
pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xc7400000-0xc74fffff]
pci_bus 0000:80: resource 4 [io  0x8000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
pci 0000:00:05.0: disabled boot interrupts on device [8086:2f28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x160 took 21281 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x160 took 23473 usecs
pci 0000:02:00.0: CLS mismatch (64 != 32), using 64 bytes
pci 0000:80:05.0: disabled boot interrupts on device [8086:2f28]
Trying to unpack rootfs image as initramfs...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000074f25000-0x0000000078f25000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=26 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:02.0: PME: Signaling with IRQ 27
pcieport 0000:00:03.0: PME: Signaling with IRQ 29
pcieport 0000:00:1c.0: PME: Signaling with IRQ 30
pcieport 0000:00:1c.2: PME: Signaling with IRQ 31
pcieport 0000:00:1c.3: PME: Signaling with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.SCK0.CP00: Found 1 idle states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 18, io mem 0xc7634000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-46-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7633000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-46-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2022-08-21T07:43:11 UTC (1661067791)
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc6000000, mapped to 0x00000000ab1193b7, using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
Freeing initrd memory: 61804K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: sig=0x306f2, pf=0x1, revision=0x49
microcode: Microcode Update Driver: v2.2.
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (3239011884, 573973)->(3439007990, -199422133)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8bf8b3bafb8f11680b7c33e638b6adc8d8cce374'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8bf8b3bafb8f11680b7c33e638b6adc8d8cce374'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 2:17:724
block loop4: hash matches
acpi LNXCPU:57: hash matches
acpi LNXCPU:2a: hash matches
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3224K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1488K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/boot/vmlinuz-5.15.0-46-generic
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
dca service started, version 1.12.1
megasas: 07.717.02.00-rc1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.0-46-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst 
megaraid_sas 0000:02:00.0: BAR:0x1  BAR's base_addr(phys):0x00000000c7300000  mapped virt_addr:0x00000000633b3d25
megaraid_sas 0000:02:00.0: FW now in Ready state
megaraid_sas 0000:02:00.0: 63 bit DMA mask and 32 bit consistent mask
megaraid_sas 0000:02:00.0: firmware supports msix	: (96)
megaraid_sas 0000:02:00.0: requested/available msix 25/25 poll_queue 0
megaraid_sas 0000:02:00.0: current msix/online cpus	: (25/24)
megaraid_sas 0000:02:00.0: RDPQ mode	: (disabled)
megaraid_sas 0000:02:00.0: Current firmware supports maximum commands: 928	 LDIO threshold: 0
megaraid_sas 0000:02:00.0: Performance mode :Latency (latency index = 1)
megaraid_sas 0000:02:00.0: FW supports sync cache	: Yes
megaraid_sas 0000:02:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.15.0-46-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 4/8 memory slots populated (from DMI)
i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
pps pps0: new PPS source ptp0
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:6e:64:54
igb 0000:06:00.0: eth0: PBA No: 013A00-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638180 irq 33
ata3: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638200 irq 33
ata4: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638280 irq 33
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
pps pps1: new PPS source ptp1
igb 0000:07:00.0: added PHC on eth1
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth1: (PCIe:2.5Gb/s:Width x1) ac:1f:6b:6e:64:55
igb 0000:07:00.0: eth1: PBA No: 011000-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
megaraid_sas 0000:02:00.0: FW provided supportMaxExtLDs: 1	max_lds: 64
megaraid_sas 0000:02:00.0: controller type	: MR(2048MB)
megaraid_sas 0000:02:00.0: Online Controller Reset(OCR)	: Enabled
megaraid_sas 0000:02:00.0: Secure JBOD support	: Yes
megaraid_sas 0000:02:00.0: NVMe passthru support	: No
megaraid_sas 0000:02:00.0: FW provided TM TaskAbort/Reset timeout	: 0 secs/0 secs
megaraid_sas 0000:02:00.0: JBOD sequence map support	: Yes
megaraid_sas 0000:02:00.0: PCI Lane Margining support	: No
igb 0000:07:00.0 eno2: renamed from eth1
megaraid_sas 0000:02:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000
megaraid_sas 0000:02:00.0: INIT adapter done
megaraid_sas 0000:02:00.0: Snap dump wait time	: 15
megaraid_sas 0000:02:00.0: pci id		: (0x1000)/(0x005d)/(0x15d9)/(0x0809)
megaraid_sas 0000:02:00.0: unevenspan support	: no
megaraid_sas 0000:02:00.0: firmware crash dump	: yes
megaraid_sas 0000:02:00.0: JBOD sequence map	: enabled
megaraid_sas 0000:02:00.0: Max firmware commands: 927 shared with default hw_queues = 24 poll_queues 0
scsi host0: Avago SAS based MegaRAID driver
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata5: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632100 irq 69
ata6: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632180 irq 69
ata7: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632200 irq 69
ata8: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632280 irq 69
ata9: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632300 irq 69
ata10: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632380 irq 69
tsc: Refined TSC clocksource calibration: 2394.653 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22847c5d6d0, max_idle_ns: 440795298929 ns
clocksource: Switched to clocksource tsc
usb 3-3: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-11: Samsung SSD 860 PRO 512GB, RVM02B6Q, max UDMA/133
ata5.00: disabling queued TRIM support
ata5.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-11: Samsung SSD 860 PRO 512GB, RVM02B6Q, max UDMA/133
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata6.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata6.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata5.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
ata6.00: supports DRM functions and may not be fully accessible
sd 5:0:0:0: Attached scsi generic sg0 type 0
ata5.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: disabling queued TRIM support
ata5.00: Enabling discard_zeroes_data
ata6.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access     ATA      Samsung SSD 860  2B6Q PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
ata6.00: Enabling discard_zeroes_data
sd 6:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
 sda: sda1
ata5.00: Enabling discard_zeroes_data
 sdb: sdb1 sdb2 sdb3
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sda] supports TCG Opal
sd 5:0:0:0: [sda] Attached SCSI disk
sd 6:0:0:0: [sdb] supports TCG Opal
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 3-3: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
igb 0000:06:00.0 eno1: renamed from eth0
usb 3-14: new high-speed USB device number 3 using xhci_hcd
usb 3-14: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 4 ports detected
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0001/input/input2
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input4
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input5
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
usb 3-14.1: new low-speed USB device number 4 using xhci_hcd
logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input8
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3/input1:1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input13
hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-3/input1:2
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0005/input/input17
input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input18
hid-generic 0003:0557:2419.0005: input,hidraw2: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3/input1:1
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0006/input/input19
hid-generic 0003:0557:2419.0006: input,hidraw3: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input20
logitech-hidpp-device 0003:046D:4054.0004: input,hidraw5: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-3/input1:2
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 249.11-0ubuntu3.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module mtdpstore...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
mtd device must be supplied (device name is empty)
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module pstore_blk.
systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module pstore_zone.
systemd[1]: modprobe@ramoops.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module ramoops.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Activating swap /swapfile...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swaps.
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Preparation for Local File Systems.
systemd[1]: Mounting Mount unit for bare, revision 5...
systemd[1]: Mounting Mount unit for core20, revision 1405...
systemd[1]: Mounting Mount unit for core20, revision 1611...
loop0: detected capacity change from 0 to 8
loop1: detected capacity change from 0 to 126760
systemd[1]: Mounting Mount unit for firefox, revision 1232...
loop2: detected capacity change from 0 to 126888
systemd[1]: Mounting Mount unit for firefox, revision 1670...
loop3: detected capacity change from 0 to 318728
systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 112...
loop4: detected capacity change from 0 to 334448
systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 99...
loop5: detected capacity change from 0 to 820832
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1534...
loop6: detected capacity change from 0 to 509456
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1535...
loop7: detected capacity change from 0 to 166424
systemd[1]: Mounting Mount unit for snap-store, revision 575...
systemd[1]: Mounting Mount unit for snapd, revision 15177...
loop8: detected capacity change from 0 to 187776
systemd[1]: Mounting Mount unit for snapd, revision 16292...
loop9: detected capacity change from 0 to 93920
systemd[1]: Mounting Mount unit for snapd-desktop-integration, revision 10...
loop10: detected capacity change from 0 to 89352
systemd[1]: Mounting Mount unit for snapd-desktop-integration, revision 14...
loop11: detected capacity change from 0 to 96176
systemd[1]: Starting Rule-based Manager for Device Events and Files...
loop12: detected capacity change from 0 to 568
loop13: detected capacity change from 0 to 568
systemd[1]: modprobe@chromeos_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module chromeos_pstore.
systemd[1]: Mounted Mount unit for bare, revision 5.
systemd[1]: Mounted Mount unit for core20, revision 1405.
systemd[1]: Mounted Mount unit for core20, revision 1611.
systemd[1]: Mounted Mount unit for firefox, revision 1232.
systemd[1]: Mounted Mount unit for firefox, revision 1670.
systemd[1]: Mounted Mount unit for gnome-3-38-2004, revision 112.
systemd[1]: Mounted Mount unit for gnome-3-38-2004, revision 99.
systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1534.
systemd[1]: Mounted Mount unit for gtk-common-themes, revision 1535.
systemd[1]: Mounted Mount unit for snap-store, revision 575.
systemd[1]: Mounted Mount unit for snapd, revision 15177.
systemd[1]: Mounted Mount unit for snapd, revision 16292.
systemd[1]: Mounted Mount unit for snapd-desktop-integration, revision 10.
systemd[1]: Mounted Mount unit for snapd-desktop-integration, revision 14.
systemd[1]: Started Journal Service.
systemd-journald[473]: Received client request to flush runtime journal.
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ioatdma: Intel(R) QuickData Technology Driver 5.00
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
igb 0000:06:00.0: DCA enabled
igb 0000:07:00.0: DCA enabled
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
cryptd: max_cpu_qlen set to 1000
checking generic (c6000000 130000) vs hw (c6000000 1000000)
fb0: switching to ast from VESA VGA
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Console: switching to colour dummy device 80x25
ast 0000:05:00.0: [drm] Using P2A bridge for configuration
ast 0000:05:00.0: [drm] AST 2400 detected
ast 0000:05:00.0: [drm] Analog VGA only
ast 0000:05:00.0: [drm] dram MCLK=408 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 20120228 for 0000:05:00.0 on minor 0
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ast 0000:05:00.0: [drm] fb0: astdrmfb frame buffer device
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC MC0: Giving out device to module sb_edac controller Haswell SrcID#1_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#0: DEV 0000:7f:12.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.2 
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: DRAM domain energy unit 15300pj
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: DRAM domain energy unit 15300pj
audit: type=1400 audit(1661067794.683:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=722 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=714 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=720 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1661067794.683:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=715 comm="apparmor_parser"
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0831, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
loop14: detected capacity change from 0 to 8
kauditd_printk_skb: 38 callbacks suppressed
audit: type=1400 audit(1661067796.707:49): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1466 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661067796.707:50): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1466 comm="snap-confine" capability=38  capname="perfmon"
snapd-desktop-i[1466]: segfault at 0 ip 00007fc4a4d05364 sp 00007fff14769598 error 4 in libglib-2.0.so.0.6400.6[7fc4a4cdb000+9a000]
Code: f8 5b 5d c3 66 90 f3 0f 1e fa 48 83 ec 08 e8 c3 70 fd ff 85 c0 0f 94 c0 48 83 c4 08 0f b6 c0 c3 66 0f 1f 44 00 00 f3 0f 1e fa  be 07 41 b8 05 15 00 00 84 c0 74 1d 0f 1f 80 00 00 00 00 44 89
audit: type=1400 audit(1661067797.191:51): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1533 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661067797.191:52): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1533 comm="snap-confine" capability=38  capname="perfmon"
snapd-desktop-i[1533]: segfault at 0 ip 00007f3d67726364 sp 00007ffce9ca6fc8 error 4 in libglib-2.0.so.0.6400.6[7f3d676fc000+9a000]
Code: f8 5b 5d c3 66 90 f3 0f 1e fa 48 83 ec 08 e8 c3 70 fd ff 85 c0 0f 94 c0 48 83 c4 08 0f b6 c0 c3 66 0f 1f 44 00 00 f3 0f 1e fa  be 07 41 b8 05 15 00 00 84 c0 74 1d 0f 1f 80 00 00 00 00 44 89
audit: type=1400 audit(1661067797.759:53): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1677 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661067797.759:54): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1677 comm="snap-confine" capability=38  capname="perfmon"
rfkill: input handler disabled
audit: type=1400 audit(1661067797.839:55): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1818 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661067797.839:56): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1818 comm="snap-confine" capability=38  capname="perfmon"
igb 0000:07:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1400 audit(1661067833.651:71): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=2302 comm="cups-browsed" capability=23  capname="sys_nice"
logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected.
audit: type=1400 audit(1661068605.775:72): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=3967 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661068605.775:73): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=3967 comm="snap-confine" capability=38  capname="perfmon"
audit: type=1400 audit(1661068605.855:74): apparmor="DENIED" operation="mkdir" profile="snap-update-ns.firefox" name="/usr/share/libreoffice/help/" pid=3987 comm="8" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
audit: type=1400 audit(1661068605.859:75): apparmor="DENIED" operation="open" profile="snap-update-ns.firefox" name="/var/lib/" pid=3987 comm="8" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1661068605.911:76): apparmor="DENIED" operation="mkdir" profile="snap.firefox.firefox" name="/run/user/0/" pid=4015 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
audit: type=1400 audit(1661068606.067:77): apparmor="DENIED" operation="capable" profile="snap.firefox.firefox" pid=3967 comm="firefox" capability=2  capname="dac_read_search"
audit: type=1400 audit(1661068606.067:78): apparmor="DENIED" operation="capable" profile="snap.firefox.firefox" pid=3967 comm="firefox" capability=1  capname="dac_override"
audit: type=1400 audit(1661068606.083:79): apparmor="DENIED" operation="capable" profile="snap.firefox.firefox" pid=4042 comm="firefox" capability=2  capname="dac_read_search"
audit: type=1400 audit(1661068606.083:80): apparmor="DENIED" operation="capable" profile="snap.firefox.firefox" pid=4042 comm="firefox" capability=1  capname="dac_override"
audit: type=1400 audit(1661068606.091:81): apparmor="DENIED" operation="capable" profile="snap.firefox.firefox" pid=4042 comm="firefox" capability=2  capname="dac_read_search"
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1400 audit(1661069194.564:83): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=5300 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661069194.564:84): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=5300 comm="snap-confine" capability=38  capname="perfmon"
audit: type=1326 audit(1661069195.132:85): auid=1000 uid=1000 gid=1000 ses=2 subj=? pid=5300 comm="firefox" exe="/snap/firefox/1670/usr/lib/firefox/firefox" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f845359673d code=0x50000
audit: type=1400 audit(1661073283.354:86): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=19491 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661073283.354:87): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=19491 comm="snap-confine" capability=38  capname="perfmon"
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3161 > 3130), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3958 > 3951), lowering kernel.perf_event_max_sample_rate to 50500
audit: type=1400 audit(1661089060.086:88): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=61646 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1661089060.086:89): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=61646 comm="snap-confine" capability=38  capname="perfmon"
perf: interrupt took too long (4952 > 4947), lowering kernel.perf_event_max_sample_rate to 40250
audit: type=1326 audit(1661096663.846:90): auid=1000 uid=1000 gid=1000 ses=2 subj=? pid=1818 comm="pool-org.gnome." exe="/snap/snap-store/575/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fbd2a15c39b code=0x50000
perf: interrupt took too long (6398 > 6190), lowering kernel.perf_event_max_sample_rate to 31250

Return To 2 x Intel I210 - 2 x Intel Xeon E5-2620 v3 System Information